SOFIALXC Brass Sheet H62 200mm Wide and 500mm Long-Thickness:0.8mm


SOFIALXC Brass Sheet H62 200mm Wide and 500mm Long-Thickness:0.8mm by SOFIALXC at Wahoo Walls. Hurry! Limited time offer. Offer valid only while supplies last. Product descriptionMaterial: H62 brass SheetHeat treatmentHot working temperature: 750 ~ 830 ¡æAnnealing temperature: 600 ~ 700 ¡æEliminate the internal stress of low annealing temperature: 260 ~ 270 ¡æ.Chemical composition of H62Cu (%): 60.5-63.5Fe(%): 0.15Pb(%): 0.08Ni(%): 0.5Zn(%):35.27-38.27Impurities(%): 0.5Hardness: Y2Tensile strength ¦Òb.N/mm2: 343-460Elongation ¦Ä(%): ¡Ý20Reduction of area ¦×(%): ¡Ý18Size:7 different Thickness for you to choosefrom:Thickness:0.1mm,0.2mm,0


SOFIALXC Brass Sheet H62 200mm Wide and 500mm Long-Thickness:0.8mm by SOFIALXC
4.0 out of 5 stars with 26 reviews
Condition: New
Availability: In Stock
$40.04


Quantity:  

 


Product Description & Reviews

Product descriptionMaterial: H62 brass SheetHeat treatmentHot working temperature: 750 ~ 830 ¡æAnnealing temperature: 600 ~ 700 ¡æEliminate the internal stress of low annealing temperature: 260 ~ 270 ¡æ.Chemical composition of H62Cu (%): 60.5-63.5Fe(%): 0.15Pb(%): 0.08Ni(%): 0.5Zn(%):35.27-38.27Impurities(%): 0.5Hardness: Y2Tensile strength ¦Òb.N/mm2: 343-460Elongation ¦Ä(%): ¡Ý20Reduction of area ¦×(%): ¡Ý18Size:7 different Thickness for you to choosefrom:Thickness:0.1mm,0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,Width:200mm,Length:500mmFeatures:Brass sheet is mainly used for riveting,cutting tools and all kinds of precision parts.Having good mechanical properties and hot plasticity as well as good machinability, the sheets are easy to weld, and it has corrosion resistant, but easy to produce corrosion cracking. It is one of the widely used ordinary brass varieties. Used for the loaded parts made of a variety of deep stretching and bending stress such as pin, rivets, washers, nuts, conduit, barometer spring, screen mesh, radiator parts,etc.Package included1 x Brass Sheet

Features & Highlights

  • ✔ Good at electrical conductivity, thermal conductivity, corrosion resistance and others processing properties.
  • ✔ Brass sheet is mainly used for riveting,cutting tools and all kinds of precision parts.
  • ✔ 7 different Thickness for you to choosefrom:Thickness:0.1mm,0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,Width:200mm,Length:500mm
  • ✔ Material properties: hot processing temperature is 750-830 degree ;The annealing temperature is 600-700 degree;The low temperature annealing temperature for eliminating internal stress is 260-270 degree .
  • ✔ It is one of the widely used ordinary brass varieties. Used for the loaded parts made of a variety of deep stretching and bending stress such as pin, rivets, washers, nuts, conduit, barometer spring, screen mesh, radiator parts,etc.

Additional Information

Brand:
SOFIALXC
Manufacturer:
SOFIALXC
Category:
Brass
EAN:
6406695771548
Size:
Thickness:0.8mm
Publisher:
SOFIALXC
Binding:
Kitchen

 


Have questions about this item (6406695771548), or would like to inquire about a custom or bulk order?


If you have any questions about this product by SOFIALXC, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: 17545, ean: 0698158175451,
Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a va...

mpn: B031B010, ean: 0698158174157,
Features:Each roll has printed information including: lot#; material type, width, and thickness; and brand.Half hard, cold rolled,CDA 260 alloy, typical 70% Cu-30%ZnRockwell Hardness: 30T 56 - 68Meets SAE-CA-260, CDA 260, ASTM B-19 & B-36Tensile Stre...

mpn: #764536, ean: 0302701551752,
Specification: Brass Sheet  Panel Size: 300mm x 200mm x 1.5mm  Thickness: 1.5mm  Layers: Single Side  Suitable For: Manufacture of precision instruments, ship parts Features: - Excellent ductility, high strength  - Good machinability  - Wel...

mpn: 3601/2H500x2,
360 Brass is also known as free-machining brass. Its Low Lead content prevents successful welding However does provide lubrication to enable high-speed machining such as drilling, milling, and tapping with reduced tool wear and breakage. 360 Brass is...