Rods / Steel


Save on Rods (in Steel) at Wahoo Walls [86]. Top brands include Online Metal Supply, Small Parts, Eastwood, & National Hardware. Hurry! Limited time offers. Offers valid only while supplies last.



Online Metal Supply A2 DCF Tool Steel Round Rod, 1.750 (1-3/4 inch) x 24 inches
By Online Metal Supply
In Stock
$65.53

mpn: 7427051705648, ean: 7427051705648,

4.5 out of 5 stars with 51 reviews
A2 Tool Steel is a versatile, air-hardening tool steel that displays good toughness and excellent dimensional stability in heat treatment. A2 has an intermediate in wear resistance between O1 and D2 tool steel.Material: Tool SteelShape: Round RodAlloy: A2Temper: AnnealedDiameter: 1.750 (1-3/4 inch)Length: 24 inchesFinish: DeCarb FreeSpecifications: ASTM A681Notes: Decarb Free Tool Steel Rounds are produced oversized to finsh to listed size. Length tolerance is (-0'' / +7/8'')A2 DCF Tool Steel Ro


Online Metal Supply 4340 CF Alloy Steel Round Rod, 2.500 (2-1/2 inch) x 24 inches
By Online Metal Supply
In Stock
$73.24

mpn: 7427051337863, ean: 7427051337863,

4.8 out of 5 stars with 29 reviews
4340 is a highly alloyed steel with high nickel and chromium content which assures deep hardening when oil quenched, with high strength characteristics throughout the section. Used for heavily stressed parts operating under strenuous conditions. Color Code: Magenta.Material: Alloy SteelShape: Round RodAlloy: 4340Temper: AnnealedDiameter: 2.500 (2-1/2 inch)Length: 24 inchesFinish: Cold FinishedSpecifications: ASTM A108Notes: Length tolerance is (-1/16'' / +3/4'')4340 CF Alloy Steel Round Rod. Dia


Online Metal Supply 1018 CF Steel Round Rod, 2.000 (2 inch) x 60 inches
By Online Metal Supply
In Stock
$113.21

mpn: 7426982158141, ean: 7426982158141,

4.7 out of 5 stars with 47 reviews
1018 is a general purpose, low carbon steel with a medium manganese content, also known as ''mild steel''. C1018 has good case hardening properties and excellent machinability. Suitable for shafting and for other applications that do not require the greater strength of high carbon and alloy steels. Color Code: GreenMaterial: SteelShape: Round RodAlloy: 1018Temper: AnnealedDiameter: 2.000 (2 inch)Length: 60 inchesFinish: Cold FinishedSpecifications: ASTM.A322, A304, A29Notes: Length tolerance is


Online Metal Supply P20 DCF Tool Steel Round Rod, 1.750 (1-3/4 inch) x 36 inches
By Online Metal Supply
In Stock
$99.79

mpn: 7427058847686, ean: 7427058847686,

4.6 out of 5 stars with 38 reviews
P20 Prehardened is a versatile, chrome-moly tool steel. It is delivered fully quenched and tempered to approximately Brinell 300. Other hardness levels may be obtained through additional heat treatment. P20 composition and structure provide excellent machining and polishing characteristics. Material: Tool SteelShape: Round RodAlloy: P20Temper: Q&TDiameter: 1.750 (1-3/4 inch)Length: 36 inchesFinish: DeCarb FreeSpecifications: UNS T51620Notes: Decarb Free Tool Steel Rounds are produced oversized t


Online Metal Supply 1018 CF Steel Round Rod, 2.000 (2 inch) x 48 inches
By Online Metal Supply
In Stock
$93.56

mpn: 7426982158134, ean: 7426982158134,

4.5 out of 5 stars with 10 reviews
1018 is a general purpose, low carbon steel with a medium manganese content, also known as ''mild steel''. C1018 has good case hardening properties and excellent machinability. Suitable for shafting and for other applications that do not require the greater strength of high carbon and alloy steels. Color Code: GreenMaterial: SteelShape: Round RodAlloy: 1018Temper: AnnealedDiameter: 2.000 (2 inch)Length: 48 inchesFinish: Cold FinishedSpecifications: ASTM.A322, A304, A29Notes: Length tolerance is


Online Metal Supply S7 DCF Tool Steel Round Rod, 8.500 (8-1/2 inch) x 3 inches
By Online Metal Supply
In Stock
$158.22

mpn: 7427058528288, ean: 7427058528288,

4.2 out of 5 stars with 55 reviews
S7 is a general purpose air-hardening tool steel with high impact and shock resistance. It has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot work and cold work applications. Excellent combination of high strength and toughness. Useful in moderate hot work as well as cold work work tooling. Added size stability when air hardened.Material: Tool SteelShape: Round RodAlloy: S7Temper: AnnealedDiameter: 8.500 (8-1/2 inch)Len


Online Metal Supply 1018 CF Steel Round Rod, 2.000 (2 inch) x 36 inches
By Online Metal Supply
In Stock
$73.92

mpn: 7426982158127, ean: 7426982158127,

4.7 out of 5 stars with 37 reviews
1018 is a general purpose, low carbon steel with a medium manganese content, also known as ''mild steel''. C1018 has good case hardening properties and excellent machinability. Suitable for shafting and for other applications that do not require the greater strength of high carbon and alloy steels. Color Code: GreenMaterial: SteelShape: Round RodAlloy: 1018Temper: AnnealedDiameter: 2.000 (2 inch)Length: 36 inchesFinish: Cold FinishedSpecifications: ASTM.A322, A304, A29Notes: Length tolerance is


Online Metal Supply A2 DCF Tool Steel Round Rod, 1.750 (1-3/4 inch) x 12 inches
By Online Metal Supply
In Stock
$39.26

mpn: 7427051705525, ean: 7427051705525,

4.6 out of 5 stars with 9 reviews
A2 Tool Steel is a versatile, air-hardening tool steel that displays good toughness and excellent dimensional stability in heat treatment. A2 has an intermediate in wear resistance between O1 and D2 tool steel.Material: Tool SteelShape: Round RodAlloy: A2Temper: AnnealedDiameter: 1.750 (1-3/4 inch)Length: 12 inchesFinish: DeCarb FreeSpecifications: ASTM A681Notes: Decarb Free Tool Steel Rounds are produced oversized to finsh to listed size. Length tolerance is (-0'' / +7/8'')A2 DCF Tool Steel Ro


Online Metal Supply 1045 CF Steel Round Rod, 0.875 (7/8 inch) x 36 inches
By Online Metal Supply
In Stock
$32.80

mpn: 7426982179191, ean: 7426982179191,

4.0 out of 5 stars with 19 reviews
1045 round bar is a medium carbon range steel that offers better mechanical properties than 1018 steel and other lower carbon steels. It has good heat treatment response and fair welding characteristics. It can be forged and it is the most common shafting steel in the medium carbon range.. Color Code: Purple/White StripeMaterial: SteelShape: Round RodAlloy: 1045Temper: AnnealedDiameter: 0.875 (7/8 inch)Length: 36 inchesFinish: Cold FinishedSpecifications: AISI 1045Notes: Length tolerance is (-1/


Online Metal Supply 1045 TGP Steel Round Rod, 0.669 (17mm) x 36 inches
By Online Metal Supply
In Stock
$32.84

mpn: 7426982219361, ean: 7426982219361,

4.4 out of 5 stars with 48 reviews
Turned or Drawn, Ground and Polished Steel Round Bar is ground and polished to a fine surface finish (32 micro) and is produced to exact or slightly undersized (+0/-0.005) for slip fit into bearings and linear rail applications. 1045 round bar is a medium carbon range steel that offers better mechanical properties than 1018 steel and other lower carbon steels. It has good heat treatment response and fair welding characteristics. It can be forged and it is the most common shafting steel in the me


Online Metal Supply W-1 Tool Steel Drill Rod, 0.4844" (31/64 inch) x 36 inches (3 Pack)
By Online Metal Supply
In Stock
$42.76

mpn: 7426982166122, ean: 7426982166122,

4.4 out of 5 stars with 19 reviews
W-1 water-hardening tool steel. It has uniform machining properties and consistent response to heat treatment through carefully controlled chemical analysis. It is a fine-grained electric furnace-melted commercial grade tool steel which is supplied in the fully-spheroidized 100% decarb-free condition. W-1 is the most popular, versatile, and least expensive grade of drill rod. The through-hardening characteristic has optimum response to heat treatment and provides toughness and excellent wear-res


Online Metal Supply 1018 CF Steel Round Rod, 1.000 (1 inch) x 48 inches
By Online Metal Supply
In Stock
$41.18

mpn: 7426982155096, ean: 7426982155096,

4.5 out of 5 stars with 37 reviews
1018 is a general purpose, low carbon steel with a medium manganese content, also known as ''mild steel''. C1018 has good case hardening properties and excellent machinability. Suitable for shafting and for other applications that do not require the greater strength of high carbon and alloy steels. Color Code: GreenMaterial: SteelShape: Round RodAlloy: 1018Temper: AnnealedDiameter: 1.000 (1 inch)Length: 48 inchesFinish: Cold FinishedSpecifications: ASTM.A322, A304, A29Notes: Length tolerance is


W1 Tool Steel Round Rod, Polished Finish, Precision Ground, Precision Tolerance, 1" Diameter, 36" Length
By Small Parts
In Stock
$67.88

mpn: 18025, ean: 0698158180257,

4.0 out of 5 stars with 29 reviews
The W1 tool steel round rod has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 and Society of Automotive Engineers SAE J437 specifications, and has a precision tolerance. The W1 tool steel grade has high carbon content for hardness and provides excellent machinability when hardened in water following heat treatment. The polished finish offers a smooth surface with few imperfections. The rod has been ground to achieve the precise shape


Eastwood Rod Forming Tool Steel Construction Bend Mild Stainless Steel Aluminum Rod For Round Flat Square Stock
By Eastwood
In Stock
$51.99

mpn: 21320, ean: 0607174134052,

4.6 out of 5 stars with 50 reviews
The Eastwood Rod Forming Tool Is A High Quality, Industrial Style Tool Capable Of Generating A Powerful Leveraged Force . Create 180° Or Greater Repeatable Bends In Mild Steel, Stainless Steel, And Aluminum Rods Up To 3/8'' Diameter And Flat Stock Up To 1/2'' Wide And 3/16'' Thick. Maximum Flat Stock Material Thickness: 3/16'' For 1/2'' Wide Mild Steel Or 1/4'''' For 1/4'' Wide Mild Steel. 0.5'' D/0.25'' , 0.75'' D/0.38 , 1.5'' D/0.75'' , 1.25'' D/0.63'' , 1'' D/0.5'' Radius Die. Creates Bends


O1 Tool Steel Round Rod, Polished Finish, Precision Ground, Precision Tolerance, 5/8" Diameter, 36" Length
By Small Parts
In Stock
$31.95

mpn: 28049, ean: 0698158280490,

4.8 out of 5 stars with 39 reviews
The O1 tool steel round rod has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 and Society of Automotive Engineers SAE J437 specifications, and has a precision tolerance. The O1 tool steel grade has better machinability than A2 tool steel. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The polished finish offers a smooth surface with few imperfections. The rod has been grou


Online Metal Supply 1045 CF Steel Round Rod, 0.875 (7/8 inch) x 48 inches
By Online Metal Supply
In Stock
$38.73

mpn: 7426982179207, ean: 7426982179207,

4.3 out of 5 stars with 17 reviews
1045 round bar is a medium carbon range steel that offers better mechanical properties than 1018 steel and other lower carbon steels. It has good heat treatment response and fair welding characteristics. It can be forged and it is the most common shafting steel in the medium carbon range.. Color Code: Purple/White StripeMaterial: SteelShape: Round RodAlloy: 1045Temper: AnnealedDiameter: 0.875 (7/8 inch)Length: 48 inchesFinish: Cold FinishedSpecifications: AISI 1045Notes: Length tolerance is (-1/


National Hardware N179-598 4000BC Steel Threaded Rod in Zinc plated
By National Hardware
In Stock
$29.56

mpn: N179598, ean: 0038613179592,

4.3 out of 5 stars with 55 reviews
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted fl


Online Metal Supply 1144 CF Steel Round Rod, 0.250 (1/4 inch) x 48 inches (3 Pack)
By Online Metal Supply
In Stock
$28.01

mpn: 7427003326457, ean: 7427003326457,

4.2 out of 5 stars with 57 reviews
1144 is a resulphurized carbon steel containing manganese and sulphur to provide a freemachining steel. It is recommended machined parts requiring higher strength and wear resistance than is possible with lower carbon steels. Color Code: BrownMaterial: SteelShape: Round RodAlloy: 1144Temper: AnnealedDiameter: 0.250 (1/4 inch)Length: 48 inches (3 Pack)Finish: Cold FinishedSpecifications: AMS A311Notes: Length tolerance is (-1/16'' / +3/4'')1144 CF Steel Round Rod. Diameter: 0.250 (1/4 inch). Leng


Online Metal Supply S7 DCF Tool Steel Round Rod, 0.500 (1/2 inch) x 36 inches
By Online Metal Supply
In Stock
$28.04

mpn: 7427058509973, ean: 7427058509973,

4.9 out of 5 stars with 28 reviews
S7 is a general purpose air-hardening tool steel with high impact and shock resistance. It has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot work and cold work applications. Excellent combination of high strength and toughness. Useful in moderate hot work as well as cold work work tooling. Added size stability when air hardened.Material: Tool SteelShape: Round RodAlloy: S7Temper: AnnealedDiameter: 0.500 (1/2 inch)Lengt


4140 Alloy Steel Disc, Unpolished (Mill) Finish, ASTM A29, 6" Diameter, 1/2" Thickness
By Small Parts
In Stock
$35.40

mpn: 4140A6.000RDL0.042,

4.3 out of 5 stars with 37 reviews
The 4140 alloy steel disc has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM A29 specifications, and has a standard tolerance. The 4140 alloy steel grade contains chromium and molybdenum for high strength and has good machinability. This material can be heat treated for higher hardness.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have gre



Viewing Page 1 of 2

Browse Our Catalog