Rods / Tungsten - Page 2


Save on Rods (in Tungsten) at Wahoo Walls, Page 2 [74]. Top brands include Castlebar, ZCC America, Castlebar Corporation, Torrey Hills Technologies, & Midwest Tungsten Service. Hurry! Limited time offers. Offers valid only while supplies last.



Castlebar 2 Hole Straight 16mm x 330mm, 5.0mm BC, 1.5mm DS Round, Unground, Grade 1008/C2 Tungsten Carbide Coolant Rod
By Castlebar
In Stock
$106.63

mpn: 30619,

4.1 out of 5 stars with 27 reviews
Tungsten Carbide Coolant Round Rod with 2 straight holes. 16mm x 330mm and 5.0mm bolt circle, 1.5mm duct size. Unground. 10% Cobalt. Grade 1008/C2. The most versatile grade for steel manufacturing including non-tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available. All rods are HIP-sintered and lot certified for quality contro


Castlebar 1 Hole Straight 22mm x 330mm, 3.0mm DS Round, Unground, Grade 1008/C2 Tungsten Carbide Coolant Rod
By Castlebar
In Stock
$190.33

mpn: 20023,

4.7 out of 5 stars with 42 reviews
Tungsten Carbide Coolant Round Rod with 1 straight hole. 22mm x 330mm, 3.0mm duct size. Unground. 10% Cobalt. Cemented Carbide, Grade 1008/C2. The most versatile grade for steel manufacturing including non-tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available. All rods are HIP-sintered and lot certified for quality control and


Castlebar 2 Hole Straight 10mm x 330mm, 5.0mm BC, 1.4mm DS Round, Unground, Grade 1008/C2 Tungsten Carbide Coolant Rod
By Castlebar
In Stock
$50.37

mpn: 30607,

4.5 out of 5 stars with 56 reviews
Tungsten Carbide Coolant Round Rod with 2 straight holes. 10mm x 330mm and 5.0mm bolt circle, 1.4mm duct size. Unground. 10% Cobalt. Grade 1008/C2. The most versatile grade for steel manufacturing including non-tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available. All rods are HIP-sintered and lot certified for quality contro


ZCC America, 7/8 X 4'', Grade YL10.2/C2, Ground Polished Chamfered Cemented Tungsten Carbide Round Rod
By ZCC America
In Stock
$50.68

mpn: 7/8'' X 4'' GPC, Grade YL10.2/C2,

4.3 out of 5 stars with 48 reviews
Classical grade for general applications. Suitable for the machining of general materials such as common steel, cast iron, non-ferrous metal Recommended to make conventional tools such as twist drills, end mills, screw taps, etc.


Castlebar 1" X 4", Grade 1008/C2, Ground Polished Chamfered, Premium 10% Cemented Tungsten Carbide Round Rod
By Castlebar
In Stock
$62.57

mpn: 69393,

4.9 out of 5 stars with 37 reviews
Tungsten Carbide Round Rod 1'' x 4''. Ground Polished Chamfered. 10% Cobalt. Cemented Carbide, Grade 1008/C2. Premium High Performance, impact and TRS intended for Aerospace & Defense applications requiring extended life and durability for steel manufacturing including non tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available.


ZCC America, 1'' X 5'', Grade YL10.2/C2, Ground Polished Chamfered Cemented Tungsten Carbide Round Rod
By ZCC America
In Stock
$81.63

mpn: 1 x 5 GPC YL10.2,

4.0 out of 5 stars with 13 reviews
Classical grade for general applications. Suitable for the machining of general materials such as common steel, cast iron, non-ferrous metal Recommended to make conventional tools such as twist drills, end mills, screw taps, etc.


Castlebar 1 Hole Straight 10.3mm x 330mm, 2.0mm DS, Unground, Grade 9008/C2, Tungsten Carbide Coolant Round Rod
By Castlebar
In Stock
$41.60

mpn: 20010-A,

4.8 out of 5 stars with 54 reviews
Tungsten Carbide Coolant Round Rod with 1 straight hole. 10.3mm x 330mm and 2mm duct size. Unground. 10% Cobalt. Grade 9008/C2. The most versatile grade for steel manufacturing including non tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available. All rods are HIP-sintered and lot certified for quality control and traceability.


Castlebar 1 Hole Straight 14mm x 330mm, 2.0mm DS Round, Unground, Grade 1008/C2 Tungsten Carbide Coolant Rod
By Castlebar
In Stock
$83.23

mpn: 20019,

4.5 out of 5 stars with 17 reviews
Tungsten Carbide Coolant Round Rod with 1 Straight Hole. 14mm x 330mm, 2.0mm duct size. Unground. 10% Cobalt. Cemented Carbide, Grade 1008/C2. The most versatile grade for steel manufacturing including non-tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available. All rods are HIP-sintered and lot certified for quality control and


Castlebar 3/8" x 3", Round, Ground, High Polished, Chamfer one end, 10% Cobalt, Grade 9008 C2 (8 Pack)
By Castlebar Corporation
In Stock
$61.92

mpn: 65280--8pack,

4.2 out of 5 stars with 44 reviews
3/8'' x 3'' (8 Pack) 3/8'' x 3'', Round, Ground, High Polished, Chamfer one end, 10% Cobalt, Grade 9008 Diameter: 3/8'' Decimal in Inches: 0.375'' h6 Tolerance: +0/-0.00035'' Length: 3'' Decimal in Inches: 3.00'' Tolerance: +0.40/-0'' Chamfer: 0.024(+/-0.008)'' Weight: 0.17 each Material: Tungsten Carbide Grain Size: Sub-Micron Grade: 9008 Surface Finish: High Polished (3.9 μin Max Ra) Product Features 10% Cobalt MPN: 65280Grade 9008/C2 (10% Cobalt). Grain Size: Sub-Micron. h6 Tolerance: +0/-0.


Castlebar 3/16" x 2", Round, Ground, Polished, Chamfer one end, 10% Cobalt, Grade 9008 C2 (39 Pack)
By Castlebar Corporation
In Stock
$44.99

mpn: 65199-39,

4.4 out of 5 stars with 39 reviews
3/16x2 (39 Pack) 3/16'' x 2'', Round, Ground, Polished, Chamfer one end, 10% Cobalt, Grade 9008 Diameter: 3/16'' Decimal in Inches: 0.1875'' h6 Tolerance: +0/-0.00031'' Length: 2'' Decimal in Inches: 2.00'' Tolerance: +0.40/-0'' Chamfer: 0.020(+/-0.008)'' Weight: 0.03 each Material: Tungsten Carbide Grain Size: Sub-Micron Grade: 9008 Surface Finish: High Polished (3.9 μin Max Ra) Product Features 10% Cobalt MPN: 65199Grade 9008/C2 (10% Cobalt). Grain Size: Sub-Micron. Surface Finish: As Sintere


Copper Tungsten Round Rod 1/2"(D) x8"(L), 70% W 30% Cu
By Torrey Hills Technologies
In Stock
$87.73

mpn: CTR0802,

4.0 out of 5 stars with 11 reviews
The copper tungsten round rod is ground to achieve the precise shape and size, meets American Welding Society RWMA Class 10 specifications, and has a precision tolerance. Copper tungsten provides high wear resistance, electrical and thermal conductivity, and corrosion resistance.Copper tungsten is a high-strength composite of two metals: 70/30 copper tungsten. It combines the benefits of conductivity of copper with the heat and wear resistance of tungsten.Tensile strength, used to indicate the m


Pure Tungsten Rod Unpolished 0.25"(D) x12"(L)
By Torrey Hills Technologies
In Stock
$42.32

mpn: TURU1211,

4.0 out of 5 stars with 11 reviews
Torrey Hills' Tungsten Properties and Applications: Tungsten has the highest melting point (3422C) of all the non-alloyed metals. It can keep its strength and stiffness at high temperatures. Tungsten has good thermal conductivity and lowest thermal expansion of any pure metal. Its corrosion resistance is excellent and it can be attacked only slightly by most mineral acids. Our Tungsten products are widely used in aviation, aerospace, nuclear high-temperature furnace, glass, ceramic, crystal prod


Castlebar 1" X 3", Grade 1008/C2, Ground Polished Chamfered, Premium 10% Cemented Tungsten Carbide Round Rod
By Castlebar
In Stock
$48.57

mpn: 69391,

4.7 out of 5 stars with 22 reviews
Tungsten Carbide Round Rod 1'' x 3''. Ground Polished Chamfered. 10% Cobalt. Cemented Carbide, Grade 1008/C2. Premium High Performance, impact and TRS intended for Aerospace & Defense applications requiring extended life and durability for steel manufacturing including non tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available.


Castlebar 3/4'' X 7'', Grade 9008/C2, Ground Polished Chamfered Cemented Tungsten Carbide Round Rod
By Castlebar
In Stock
$71.67

mpn: 65377-A,

4.6 out of 5 stars with 60 reviews
Tungsten Carbide Round Rod 3/4'' x 7''. Ground Polished Chamfered. 10% Cobalt. Cemented Carbide, Grade 9008/C2. The most versatile grade for steel manufacturing including non tempered steels with hardness up to 40 HR. Also suitable for aluminum alloys, aluminum magnesium, cast iron, non-ferrous materials. Castlebar products are made from the highest quality, virgin source carbide powders available. All rods are HIP-sintered and lot certified for quality control and trace-ability. Ground rods are


Castlebar 1/4" x 2-1/2", Round, Ground, High Polished, Chamfer one end, 10% Cobalt, Grade 9008 C2 (21 Pack)
By Castlebar Corporation
In Stock
$59.39

mpn: 65231-21pack,

4.6 out of 5 stars with 25 reviews
1/4x2-1/2 (21 Pack) 1/4'' x 2-1/2'', Round, Ground, High Polished, Chamfer one end, 10% Cobalt, Grade 9008 Diameter: 1/4'' Decimal in Inches: 0.250'' h6 Tolerance: +0/-0.00035'' Length: 2-1/2'' Decimal in Inches: 2.5'' Tolerance: +0.40/-0'' Chamfer: 0.024(+/-0.008)'' Weight: 0.06 Material: Tungsten Carbide Grain Size: Sub-Micron Grade: 9008 Surface Finish: High Polished (3.9 μin Max Ra) Product Features 10% Cobalt MPN: 65231Grade 9008/C2 (10% Cobalt). Grain Size: Sub-Micron. Surface Finish: As


99.95% Pure Tungsten Rod - 0.125" Diameter x 36" Length
By Midwest Tungsten Service
In Stock
$59.99

mpn: 40300-00148A, ean: 0078776673186,

4.2 out of 5 stars with 14 reviews
High quality 99.95% pure tungsten (W) rod in 0.125'' (1/8'') diameter x 36'' length conforms to international standard ASTM B760. You will receive a complementary material cert in the safely packaged shipment. All material is lot controlled, stress relieved, and formed through high temperature pressing and sintering processes. This rod is perfect for machine shops, labs, research and development, and DIY machinists. Also check out our Tungsten Alloy and Molybdenum rods!PURE 99.95% Tungsten (W) R



Viewing Page 2 of 2

Browse Our Catalog